Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Omega 872A: (1 year) CAL VER /5500
DATE:                  08-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.4 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       14
NUMBER OF LINES:       70
CONFIGURATION:         Fluke 5500A
=============================================================================
#
# Compatibility:
#   5500/CAL 4.0 or MET/CAL 4.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        V
  1.002  ASK+           K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS
  1.004  DISP         Warm-up time: 30 min. - REQUIRED
  1.004  DISP         Temperature: 22 - 24 degC
  1.004  DISP         Humidity: <80%
  1.005  HEAD         INITIAL SETUP
  1.006  DISP         Turn UUT on, if Battery indicator illuminates,
  1.006  DISP         replace battery before proceeding.
  1.007  DISP         {TC1 INPUT}
  1.008  DISP         Set TC to TC1.
  1.009  DISP         Connect the 5500A TC terminals to the TC1 Input using
  1.009  DISP         J Type thermocouple wire and connectors.
  1.010  DISP         Set the UUT to the 1400degF Range.
  1.011  HEAD         TC1 INPUT: {1400degF Range}
  1.012  5500         -35degF        0.25% 1.8U                   _J TC    2W
  2.001  5500         32degF         0.25% 1.8U                   _J TC    2W
  3.001  5500         1390degF       0.25% 1.8U                   _J TC    2W
  4.001  HEAD         TC1 INPUT: {200degF Range}
  4.002  DISP         Set the UUT to the 200degF Range.
  4.003  5500         -35.0degF      0.25% 1.8U                   _J TC    2W
  5.001  5500         32.0degF       0.25% 1.8U                   _J TC    2W
  6.001  5500         195.0degF      0.25% 1.8U                   _J TC    2W
  7.001  HEAD         TC1 INPUT: {760degC Range}
  7.002  DISP         Set the UUT to the 760degC Range.
  7.003  5500         -35degC        0.25% 1U                     _J TC    2W
  8.001  5500         0degC          0.25% 1U                     _J TC    2W
  9.001  5500         750degC        0.25% 1U                     _J TC    2W
 10.001  HEAD         TC1 INPUT: {200degC Range}
 10.002  DISP         Set the UUT to the 200degC Range.
 10.003  5500         -35.0degC      0.25% 1U                     _J TC    2W
 11.001  5500         0.0degC        0.25% 1U                     _J TC    2W
 12.001  5500         195.0degC      0.25% 1U                     _J TC    2W
 13.001  HEAD         {TC2 INPUT}
 13.002  DISP         Set TC to TC2.
 13.003  DISP         Connect the 5500A TC terminatls to the TC2 Input using
 13.003  DISP         J Type thermocouple wire and connectors.
 13.004  HEAD         TC1 INPUT: {1400degF Range}
 13.005  DISP         Set UUT to the 1400degF Range.
 13.006  5500         32degF         2U                           _J TC    2W
 14.001  END